Cisco Nexus 3000 series - Show Logging Session Status

Send comments to nexus3k-docfeedback@cisco.com
-SM-226
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show logging session status
show logging session status
To display the logging session status, use the show logging session status command.
show logging session status
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the logging session status:
switch# show logging session status
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
logging timestamp Sets the logging time-stamp units.