Cisco Nexus 3000 series - Show Ntp Authentication-Status

Send comments to nexus3k-docfeedback@cisco.com
-SM-237
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ntp authentication-status
show ntp authentication-status
To display the status of the Network Time Protocol (NTP) authentication, use the show ntp
authentication-status command.
show ntp authentication-status
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes EXEC mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP authentication status:
switch# show ntp authentication-status
Authentication enabled.
switch#
Related Commands
Release Modification
6.0(2)U(2)1 This command was introduced.
Command Description
ntp authenticate Enables NTP authentication.
show ntp authentica-
tion-keys
Displays the configured NTP authentication keys.