Cisco Nexus 3000 series - Show Ntp Pending Peers

Send comments to nexus3k-docfeedback@cisco.com
-SM-242
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ntp pending peers
show ntp pending peers
To display pending Network Time Protocol (NTP) configuration changes on all peers, use the show ntp
pending peers command.
show ntp pending peers
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes EXEC mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the pending NTP configuration changes on all peers:
switch# show ntp pending peers
switch#
Related Commands
Release Modification
6.0(2)U(2)1 This command was introduced.
Command Description
show ntp source Displays information about the NTP source.
show ntp peers Displays information about NTP peers.