Cisco Nexus 3000 series - Show Ntp Trusted-Keys

Send comments to nexus3k-docfeedback@cisco.com
-SM-249
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ntp trusted-keys
show ntp trusted-keys
To display the configured Network Time Protocol (NTP) trusted keys, use the show ntp trusted-keys
command.
show ntp trusted-keys
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display all the configured NTP trusted keys:
switch(config)# show ntp trusted-keys
Trusted Keys:
42
switch(config)#
Release Modification
6.0(2)U(2)1 This command was introduced.