Cisco Nexus 3000 series - Show Ptp Parent

Send comments to nexus3k-docfeedback@cisco.com
-SM-256
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ptp parent
show ptp parent
To display information about the parent and grand master of the Precision Time Protocol (PTP) clock,
use the show ptp parent command.
show ptp parent
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about the parent and grand master of the PTP clock:
switch# show ptp parent
PTP PARENT PROPERTIES
Parent Clock:
Parent Clock Identity: 0: 0: 0:ff:ff: 0: 0: 0
Parent Port Number: 0
Observed Parent Offset (log variance): N/A
Observed Parent Clock Phase Change Rate: N/A
Grandmaster Clock:
Grandmaster Clock Identity: 0: 0: 0:ff:ff: 0: 0: 0
Grandmaster Clock Quality:
Class: 248
Accuracy: 254
Offset (log variance): 65535
Priority1: 255
Priority2: 255
switch#
Release Modification
5.0(3)U2(2) This command was introduced.