Cisco Nexus 3000 series - Page 328

Send comments to nexus3k-docfeedback@cisco.com
-SM-304
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
snmp-server enable traps
Command Default All notifications
Command Modes Global configuration mode
Command History
fctrace (Optional) Enables notifications for the route to an N port.
fspf (Optional) Enables notifications for the Fabric Shortest Path First
(FSPF).
license (Optional) Enables notifications for the license manager.
notify-license-expiry (Optional) Specifies the license expiry notification.
notify-license-expiry-warning (Optional) Specifies the license expiry warning notification.
notify-licensefile-missing (Optional) Specifies the license file missing notification.
notify-no-license-for-feature (Optional) Specifies that a notification is sent when no license needs
to be installed for the feature.
link (Optional) Enables notifications for uplink and downlink interfaces.
rf (Optional) Enables notifications for the redundancy framework.
redundancy_framework (Optional) Specifies the Redundancy_Framework (RF) supervisor
switchover MIB.
rmon (Optional) Enables notifications for rising, falling, and
high-capacity alarms.
fallingAlarm (Optional) Specifies the RMON falling alarm.
hcFallingAlarm (Optional) Specifies the high-capacity RMON falling alarm.
hcRisingAlarm (Optional) Specifies the high-capacity RMON rising alarm.
risingAlarm (Optional) Specifies the RMON rising alarm.
rscn (Optional) Enables RSCN notifications.
snmp (Optional) Enables SNMP authentication notifications.
authentication (Optional) Specifies the SNMP authentication trap.
storm-control (Optional) Enables the Storm Control trap.
storm-control trap-rate val (Optional) Specifies the number of Storm Control traps per minute.
vsan (Optional) Enables notifications for VSANs.
zone (Optional) Enables zone notifications.
default-zone-behavior-change (Optional) Specifies the default zone behavior change notification.
merge-failure (Optional) Specifies the merge failure notification.
merge-success (Optional) Specifies the merge success notification.
request-reject1 (Optional) Specifies the request reject notification.
unsupp-mem (Optional) Specifies the unsupported member notification.
Release Modification
6.0(2)U3(1) The storm-control option was added.
5.0(3)U1(1) This command was introduced.