Cisco Nexus 3000 series - Page 331

Send comments to nexus3k-docfeedback@cisco.com
-SM-307
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
snmp-server enable traps link
Usage Guidelines This command is disabled by default. Most notification types are disabled.
If you enter this command with no notification-type arguments, the default is to enable all notification
types controlled by this command.
Examples This example shows how to enable the SNMP link trap notification on the switch:
switch# configure terminal
switch(config)# snmp-server enable traps link
switch(config)#
This example shows how to disable the SNMP link trap notification on the switch:
switch# configure terminal
switch(config)# no snmp-server enable traps link
switch(config)#
Related Commands Command Description
show snmp trap Displays the SNMP notifications enabled or disabled.