Cisco Nexus 3000 series - Switch-Priority (Call Home)

Send comments to nexus3k-docfeedback@cisco.com
-SM-326
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
switch-priority (Call Home)
switch-priority (Call Home)
To configure the switch priority for the switch, use the switch-priority command. To remove the switch
priority, use the no form of this command.
switch-priority priority-value
no switch-priority
Syntax Description
Command Default Default priority is 7
Command Modes Callhome configuration mode
Command History
Examples This example shows how to configure the switch priority:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# switch-priority 5
switch(config-callhome)#
Related Commands
priority-value Switch priority value. The range is from 0 to 7, with 0 being the highest
priority and 7 the lowest.
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
show callhome Displays a summary of the Call Home configuration.