Cisco Nexus 3000 series - Customer-ID (Call Home)

Send comments to nexus3k-docfeedback@cisco.com
-SM-40
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
customer-id (Call Home)
customer-id (Call Home)
To configure the optional unique identification number for the customer, use the customer-id command.
To remove a customer number, use the no form of this command.
customer-id customer-no
no customer-id
Syntax Description
Command Default None
Command Modes Callhome configuration mode
Command History
Usage Guidelines You can configure the customer identification information that Cisco Smart Call Home should use. The
service agreement includes the customer identification information, such as the customer ID, contract
ID, and site ID.
Examples This example shows how to configure a customer number:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# customer-id AXC-1203
switch(config-callhome)#
Related Commands
customer-no Customer number, as specified in the service agreement. The customer
number can be up to 255 alphanumeric characters in free format.
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
site-id Configures the site number for the switch.
show callhome Displays a summary of the Call Home configuration.