Cisco Nexus 3000 series - Event Manager Policy Internal

Send comments to nexus3k-docfeedback@cisco.com
-SM-62
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
event manager policy internal
event manager policy internal
To register and activate an Embedded Event Manager (EEM) script policy, use the event manager policy
internal command. To remove the internal event manager policy, use the no form of this command.
event manager policy internal policy-name
no event manager policy internal policy-name
Syntax Description
Defaults None
Command Modes Global configuration mode
Command History
Usage Guidelines Before using the event manager policy internal command, define a policy by using the virtual shell
(VSH) script and copy the file to the system directory. For information on how to define a policy, see the
Cisco Nexus 3000 Series NX-OS System Management Configuration Guide.
This command does not require a license.
Examples This example shows how to register and activate an EEM internal policy:
switch# configure terminal
switch(config)# event manager policy internal modulescript
switch(config)#
policy-name Name of the internal policy. The policy name can be any case-sensitive
alphanumeric string up to 29 characters.
Release Modification
5.0(3)U3(1) This command was introduced.