Cisco Nexus 3000 series - Page 80

DescriptionStatusLEDComponent
The operator has
activated this LED
to identify this
switch in the
chassis.
Flashing blueBeacon (BCN)Chassis (front and
back)
Identifies the chassis
receiving the beacon
signal.
On (blue)Identification (ID)
This port has no
physical link.
Left side
Off
Solid on (green)
Management
(MGMT)
This port has a
physical link.
This port has no
activity.
Right side
Off
Blinking (green)
This port has
activity.
Green and amber
LED used to
indicate
customer-defined
status for each port.
Customer defined states
Port
This port is not in
use.
This port is unusable
during breakout.
Off
All diagnostics pass.
The module is
operational.
Solid on (green)Status (STS)
The module is not
receiving power.
Off
On (amber)
Cisco Nexus 3000 Series Hardware Installation Guide
72
LEDs
LEDs