Cisco Nexus 3548 series - Page 214

PurposeCommand
Displays a list of all checkpoints in the current switch.
You can limit the displayed checkpoints to user or
system-generated checkpoints.
show checkpoint summary [user | system]
Displays the differences between the source and
destination checkpoint selections.
show diff rollback-patch {checkpoint
src-cp-name | running-config | startup-config |
file source-file} {checkpoint dest-cp-name |
running-config | startup-config | file dest-file}
Displays the contents of the rollback log.show rollback log [exec | verify]
Use the clear checkpoint database command to delete all checkpoint files.
Note
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
200
Configuring Rollback
Verifying the Rollback Configuration