Eth1/26 1 eth access down SFP not inserted 10G(D) --
Eth1/27 1 eth access down SFP not inserted 10G(D) --
Eth1/28 1 eth access down SFP not inserted 10G(D) --
Eth1/29 1 eth access down SFP not inserted 10G(D) --
Eth1/30 1 eth access down SFP not inserted 10G(D) --
Eth1/31 1 eth access down SFP not inserted 10G(D) --
Eth1/32 1 eth access down SFP not inserted 10G(D) --
Eth1/33 1 eth access down SFP not inserted 10G(D) --
Eth1/34 1 eth access down SFP not inserted 10G(D) --
Eth1/35 1 eth access down SFP not inserted 10G(D) --
Eth1/36 1 eth access down SFP not inserted 10G(D) --
Eth1/37 1 eth access down SFP not inserted 10G(D) --
Eth1/38 1 eth access down SFP not inserted 10G(D) --
Eth1/39 1 eth access down SFP not inserted 10G(D) --
Eth1/40 1 eth trunk up none 10G(D) --
Eth2/1 1 eth access down SFP not inserted 10G(D) --
Eth2/2 1 eth access up none 10G(D) --
Eth2/3 1 eth access down SFP not inserted 10G(D) --
Eth2/4 1 eth access up none 10G(D) --
Eth2/5 1 eth access up none 10G(D) --
Eth2/6 1 eth access down SFP not inserted 10G(D) --
--------------------------------------------------------------------------------
Port-channel VLAN Type Mode Status Reason Speed Protocol
Interface
--------------------------------------------------------------------------------
Po10 1 eth trunk up none a-10G(D) lacp
Po4000 1 eth trunk up none a-10G(D) lacp
--------------------------------------------------------------------------------
Port VRF Status IP Address Speed MTU
--------------------------------------------------------------------------------
mgmt0 -- up 192.168.10.37 100 1500
-------------------------------------------------------------------------------
Interface Secondary VLAN(Type) Status Reason
-------------------------------------------------------------------------------
Vlan1 -- down Administratively down
switch#
This example shows how to display the summary configuration information of interfaces, including routed
interfaces:
switch# show interface brief
--------------------------------------------------------------------------------
Ethernet VLAN Type Mode Status Reason Speed Port
Interface Ch #
--------------------------------------------------------------------------------
Eth1/1 1 eth access down Link not connected 10G(D) --
Eth1/2 1 eth trunk up none 10G(D) --
Eth1/3 1 eth access down SFP not inserted 10G(D) --
Eth1/4 1 eth access down SFP not inserted 10G(D) --
Eth1/5 -- eth routed up none 10G(D) --
Eth1/5.2 -- eth routed down Configuration Incomplete 10G(D) --
Eth1/6 1 eth access up none 10G(D) --
Eth1/7 1 eth access up none 10G(D) --
Eth1/8 1 eth trunk up none 10G(D) 100
Eth1/9 1 eth access up none 10G(D) --
Eth1/10 1 eth access down Link not connected 10G(D) --
Eth1/11 1 eth access down SFP not inserted 10G(D) --
Eth1/12 1 eth access down SFP not inserted 10G(D) --
Eth1/13 1 eth access down SFP not inserted 10G(D) --
Eth1/14 1 eth access down SFP not inserted 10G(D) --
Eth1/15 1 eth access down SFP not inserted 10G(D) --
Eth1/16 1 eth access down SFP not inserted 10G(D) --
Eth1/17 1 eth access up none 10G(D) --
Eth1/18 1 eth access up none 10G(D) --
Eth1/19 1 eth fabric up none 10G(D) --
Eth1/20 1 eth access down Link not connected 10G(D) --
Eth1/21 1 eth access up none 10G(D) --
Eth1/22 1 eth access down Link not connected 10G(D) --
Eth1/23 1 eth access down SFP not inserted 10G(D) --
Eth1/24 1 eth access down SFP not inserted 10G(D) --
Eth1/25 1 eth access down Link not connected 10G(D) --
Cisco Nexus 5000 Series Interfaces Command Reference
108
Show Commands
show interface brief
To Next Page
Loading...
