Cisco Nexus 5000 Series - Show Port-Channel Database

show port-channel database
To display the aggregation state for one or more EtherChannel interfaces, use the show port-channel database
command.
show port-channel database [interface port-channel number [. subinterface-number]]
Syntax Description
(Optional) Displays information for an EtherChannel
interface.
interface
(Optional) Displays aggregation information for a
specific EtherChannel interface. The number range
is from 1 to 4096.
port-channel number
(Optional) Subinterface number. Use the
EtherChannel number followed by a dot (.) indicator
and the subinterface number. The format is
portchannel-number.subinterface-number.
.subinterface-number
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.4.0(0)N1(1a)
Examples
This example shows how to display the aggregation state of all EtherChannel interfaces:
switch# show port-channel database
port-channel19
Last membership update is successful
4 ports in total, 4 ports up
First operational port is Ethernet199/1/24
Age of the port-channel is 0d:09h:11m:30s
Time since last bundle is 0d:09h:12m:20s
Last bundled member is
Ports: Ethernet199/1/24 [active ] [up] *
Ethernet199/1/28 [active ] [up]
Ethernet199/1/30 [active ] [up]
Ethernet199/1/31 [active ] [up]
port-channel21
Last membership update is successful
1 ports in total, 1 ports up
First operational port is Ethernet2/3
Cisco Nexus 5000 Series Interfaces Command Reference
146
Show Commands
show port-channel database