show running-config backup
To display the running configuration for backup interfaces, use the show running-config backup command.
show running-config backup [all]
Syntax Description
(Optional) Displays backup interface information
including default settings.
all
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.5.0(3)N2(1)
Examples
This example shows how to display the running configuration for backup interfaces:
switch# show running-config backup
!Command: show running-config backup
!Time: Sun Jan 4 06:27:36 2009
version 5.0(3)N2(1)
feature flexlink
logging level Flexlink 5
interface port-channel300
switchport backup interface port-channel301 preemption mode forced
switchport backup interface port-channel301 multicast fast-convergence
interface port-channel500
switchport backup interface port-channel501 preemption delay 36
switchport backup interface port-channel501 multicast fast-convergence
interface port-channel502
switchport backup interface port-channel503
interface port-channel504
switchport backup interface Ethernet2/1
interface Ethernet1/2
switchport backup interface Ethernet1/1
interface Ethernet1/20
switchport backup interface Ethernet1/21
interface Ethernet2/2
switchport backup interface port-channel507 preemption mode forced
switch#
This example shows how to display the detailed running configuration for backup interfaces:
switch# show running-config backup all
!Command: show running-config backup all
!Time: Sun Jan 4 06:28:04 2009
Cisco Nexus 5000 Series Interfaces Command Reference
162
Show Commands
show running-config backup
To Next Page
Loading...
