Cisco Nexus 5000 Series - Page 80

This command does not require a license.
Examples
This example shows how to set the three sample intervals for the Ethernet port 3/1:
switch#
configure
terminal switch(config)#
interface
ethernet 3/1 switch(config-if)#
load-interval
counter 1 60 switch(config-if)#
load-interval
counter 2 135 switch(config-if)#
load-interval
counter 3 225
Related Commands
DescriptionCommand
Displays information about the interface.show interface
Cisco Nexus 5000 Series Interfaces Command Reference
70
L Commands
load-interval