Send feedback to nx5000-docfeedback@cisco.com
1-14
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Troubleshooting
show tech-support Command
• show zone pending active vsan 1-4093
• show fcalias pending vsan 1-4093
• show zone policy pending vsan 1-4093
• show zone pending-diff vsan 1-4093
• show zone analysis active vsan 1-4093
• show zone analysis vsan 1-4093
• show zone ess vsan 1-4093
• show zone internal vsan 1-4093
• show zone internal change event-history vsan 1-4093
• show zone internal ifindex-table vsan 1-4093
• show zone internal merge event-history vsan 1-4093
• show zone internal event-history
• show zone internal event-history errors
• show zone internal tcam event-history vsan 1-4093
• show zone statistics vsan 1-4093
• show system default zone
• show zone internal ddas-table
• show zone internal sdv-table vsan 1-4093
• show zone internal mem-stats
• show zone internal mem-stats detail
• show zone internal transit-table received vsan 1-4093
• show zone internal transit-table forwarded vsan 1-4093
• show zone internal transit-table rejected vsan 1-4093
Tip You can save the output of this command to a file by appending > (left arrow) and the filename to the
show tech-support zone command.
show tech-support platform Command
Use the show tech-support platform command to obtain information about the platform configuration
of your switch.
The output of the show tech-support platform command includes the output of the following
commands:
• show platform fwm mem-stats detail
• show platform fwm info global
• show platform fwm info pif all verbose
• show platform fwm info lif all verbose
• show platform fwm info vlan all verbose
To Next Page
Loading...
