Cisco Nexus 5000 Series - Committing Fctimer Changes

DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
switch# configure terminal
switch(config)#
Step 1
Enables fctimer configuration distribution to all switches in
the fabric. Acquires a fabric lock and stores all future
configuration changes in the pending database.
fctimer distribute
Example:
switch(config)# fctimer distribute
Step 2
Disables (default) fctimer configuration distribution to all
switches in the fabric.
no fctimer distribute
Example:
switch(config)# no fctimer distribute
Step 3
Committing fctimer Changes
When you commit the fctimer configuration changes, the effective database is overwritten by the configuration
changes in the pending database and all the switches in the fabric receive the same configuration. When you
commit the fctimer configuration changes without implementing the session feature, the fctimer configurations
are distributed to all the switches in the physical fabric.
SUMMARY STEPS
1.
configure terminal
2.
fctimer commit
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
switch# configure terminal
switch(config)#
Step 1
Distributes the fctimer configuration changes to all switches in
the fabric and releases the lock. Overwrites the effective database
with the changes made to the pending database.
fctimer commit
Example:
switch(config)# fctimer commit
Step 2
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
222 OL-27583-01
Advanced Fibre Channel Features
Fibre Channel Timeout Values