Cisco Nexus 5000 Series - Default Settings for Advanced Fibre Channel Features

Default Settings for Advanced Fibre Channel Features
The following table lists the default settings for the features included in this chapter.
Table 30: Default Settings for Advanced Features
DefaultParameters
DisabledCIM server
HTTPCIM server security protocol
5,000 millisecondsD_S_TOV
2,000 millisecondsE_D_TOV
10,000 millisecondsR_A_TOV
5 secondsTimeout period to invoke fctrace
5 framesNumber of frame sent by the fcping feature
TCPRemote capture connection protocol
PassiveRemote capture connection mode
10 framesLocal capture frame limits
Auto modeFC ID allocation mode
DisabledLoop monitoring
DisabledInterop mode
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
OL-27583-01 237
Advanced Fibre Channel Features
Default Settings for Advanced Fibre Channel Features