Cisco Nexus 5000 Series - Activating a Port Monitor Policy; Displaying Port Monitor Policies

switch(config-port-monitor)# counter credit-loss-reco poll-interval 20 delta rising-threshold
10 event 4 falling-threshold 3 event 4
Activating a Port Monitor Policy
SUMMARY STEPS
1.
switch# configure terminal
2.
switch(config)# port-monitor activate policyname
3.
(Optional) switch(config)# port-monitor activate
4.
(Optional) switch(config)# no port-monitor activate policyname
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.switch# configure terminal
Step 1
Activates the specified port monitor policy.
switch(config)# port-monitor activate policyname
Step 2
(Optional)
Activates the default port monitor policy.
switch(config)# port-monitor activate
Step 3
(Optional)
Deactivates the specified port monitor policy.
switch(config)# no port-monitor activate policyname
Step 4
This example shows how to activate a specific port monitor policy:
switch# configure terminal
switch(config)# port-monitor activate cisco
Displaying Port Monitor Policies
Use the following command to display port monitor policies:
PurposeCommand
Displays details of the specified port monitor policy.
switch# show port-monitor policyname
This example shows how to display a specific port monitor policy:
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
OL-27583-01 301
Fibre Channel Slow Drain Device Detection and Congestion Avoidance- An Overview
Port Monitoring