Cisco Nexus 5000 Series - Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1

DefaultParameters
Off (disabled)Beacon mode
DisabledEISL encapsulation
2112 bytesData field size
The following table lists the default settings for virtual Fibre Channel interface parameters.
Table 6: Default Virtual Fibre Channel Interface Parameters
DefaultParameters
F modeInterface mode
n/aInterface speed
Shutdown (unless changed during initial setup)Administrative state
OnTrunk mode
All VSANsTrunk-allowed VSANs
Default VSAN (1)Interface VSAN
n/aEISL encapsulation
n/aData field size
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
OL-27583-01 29
Configuring Fibre Channel Interfaces
Default Fibre Channel Interface Settings