Cisco Nexus 5500 Series NX-OS - Default Settings for Advanced Fibre Channel Features

Step 8
Verify the name server information.
Example:
switch# show fcns data vsan 1
VSAN 1:
------------------------------------------------------------------
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
------------------------------------------------------------------
0x610400 N 10:00:00:00:c9:24:3d:90 (Emulex) scsi-fcp
0x6105dc NL 21:00:00:20:37:28:31:6d (Seagate) scsi-fcp
0x6105e0 NL 21:00:00:20:37:28:24:7b (Seagate) scsi-fcp
0x6105e1 NL 21:00:00:20:37:28:22:ea (Seagate) scsi-fcp
0x6105e2 NL 21:00:00:20:37:28:2e:65 (Seagate) scsi-fcp
0x6105e4 NL 21:00:00:20:37:28:26:0d (Seagate) scsi-fcp
0x630400 N 10:00:00:00:c9:24:3f:75 (Emulex) scsi-fcp
0x630500 N 50:06:01:60:88:02:90:cb scsi-fcp
0x6514e2 NL 21:00:00:20:37:a7:ca:b7 (Seagate) scsi-fcp
0x6514e4 NL 21:00:00:20:37:a7:c7:e0 (Seagate) scsi-fcp
0x6514e8 NL 21:00:00:20:37:a7:c7:df (Seagate) scsi-fcp
0x651500 N 10:00:00:e0:69:f0:43:9f (JNI)
Total number of entries = 12
The Cisco switch name server shows both local and remote entries, and does not time out the
entries.
Note
Default Settings for Advanced Fibre Channel Features
The following table lists the default settings for the features included in this chapter.
Table 31: Default Settings for Advanced Features
DefaultParameters
DisabledCIM server
HTTPCIM server security protocol
5,000 millisecondsD_S_TOV
2,000 millisecondsE_D_TOV
10,000 millisecondsR_A_TOV
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
OL-30895-01 229
Advanced Fibre Channel Features
Default Settings for Advanced Fibre Channel Features