Cisco Nexus 5500 Series NX-OS - Authorization Scenario

Authorization Scenario
Assume that the port security feature is activated and the following conditions are specified in the active
database:
•
A pWWN (P1) is allowed access through interface fc2/1 (F1).
•
A pWWN (P2) is allowed access through interface fc2/2 (F1).
•
A nWWN (N1) is allowed access through interface fc2/2 (F2).
•
Any WWN is allowed access through interface vfc3/1 (F3).
•
A nWWN (N3) is allowed access through any interface.
•
A pWWN (P3) is allowed access through interface fc2/4 (F4).
•
A sWWN (S1) is allowed access through interface fc3/1-3 (F10 to F13).
•
A pWWN (P10) is allowed access through interface vfc4/1 (F11).
The following table summarizes the port security authorization results for this active database.
Table 35: Authorization Results for Scenario
ReasonConditionAuthorizationDevice Connection
Request
No conflict.1PermittedP1, N2, F1
No conflict.1PermittedP2, N2, F1
F1 is bound to P1/P2.2DeniedP3, N2, F1
Wildcard match for N3.6PermittedP1, N3, F1
Wildcard match for F3.5PermittedP1, N1, F3
P1 is bound to F1.2DeniedP1, N4, F5
N1 is only allowed on F2.2DeniedP5, N1, F5
No conflict.1PermittedP3, N3, F4
No conflict.1PermittedS1, F10
P10 is bound to F11.7DeniedS2, F11
No conflict.3PermittedP4, N4, F5 (auto-learning
on)
No match.4DeniedP4, N4, F5 (auto-learning
off)
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
254 OL-30895-01
Configuring Port Security
Auto-Learning