Cisco Nexus 5500 Series - Page 270

256
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show access-lists
40 deny tcp any eq 400 any eq 500
IP access list ipPacl
statistics per-entry
10 deny tcp any eq 400 any eq 500
IP access list ipv4
10 permit ip 10.10.10.1 225.255.255.0 any fragments
20 permit ip any any dscp ef
IP access list ipv4Acl
10 permit ip 10.10.10.1/32 10.10.10.2/32
MAC access list test
statistics per-entry
10 deny 0000.1111.2222 0000.0000.0000 0000.1111.3333 ffff.0000.0000
IP access list voice
10 remark - avaya rtp range
20 permit udp any range 49072 50175 any range 49072 50175 dscp ef
30 permit udp any range 49072 50175 any range 50176 50353 dscp ef
40 permit udp any range 50176 50353 any range 49072 50175 dscp ef
50 permit udp any range 50176 50353 any range 50176 50353 dscp ef
60 permit udp any range 2048 2815 any range 2048 2815 dscp ef
70 permit udp any range 2048 2815 any range 2816 3028 dscp ef
80 permit udp any range 2816 3028 any range 2816 3028 dscp ef
90 permit udp any range 2816 3028 any range 2048 2815 dscp ef
100 remark -- cisco rtp range
switch#
Related Commands Command Description
ip access-list Configures an IPv4 ACL.
mac access-list Configures a MAC ACL.
show ip access-lists Displays all IPv4 ACLs or a specific IPv4 ACL.
show mac access-lists Displays all MAC ACLs or a specific MAC ACL.