Cisco Nexus 5500 Series - Page 289

275
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show diff rollback-patch startup-config
Examples This example shows how to view the configuration changes between the current startup configuration
and a checkpoint named chkpnt-1:
switch# checkpoint chkpnt-1
<-- modify configuration in running configuration--->
switch# checkpoint chkpnt-2
<-- modify configuration in running configuration--->
switch# copy running-config startup-config
switch# show diff rollback-patch startup-config checkpoint chkpnt-1
Collecting Startup-Config
#Generating Rollback Patch
!!
!
feature telnet
feature ssh
username adminbackup password 5 ! role network-operator
username admin password 5 $1$KIPRDtFF$7eUMjCAd7Nkhktzebsg5/0 role network-admin
no password strength-check
switch#
This example shows how to view the configuration changes between the current startup configuration
and a saved configuration in the bootflash storage system:
switch# checkpoint chkpnt-1
<-- modify configuration in running configuration--->
switch# checkpoint file bootflash:///chkpnt_configSep9-1.txt
<-- modify configuration in running configuration--->
switch# checkpoint file bootflash:///chkpnt_configSep9-2.txt
<-- modify configuration in running configuration--->
switch# copy running-config startup-config
switch# show diff rollback-patch startup-config file chkpnt_configSep9-1.txt
switch#
This example shows how to view the configuration changes between the current startup configuration
and a checkpointed running configuration:
switch# checkpoint chkpnt-1
<-- modify configuration in running configuration--->
switch# checkpoint file bootflash:///chkpnt_configSep9-1.txt
<-- modify configuration in running configuration--->
switch# checkpoint file bootflash:///chkpnt_configSep9-2.txt
<-- modify configuration in running configuration--->
switch# copy running-config startup-config
<-- modify configuration in running configuration--->
switch# show diff rollback-patch startup-config running-config
Collecting Running-Config
Collecting Startup-Config
#Generating Rollback Patch
!!
!
feature telnet
feature ssh
username adminbackup password 5 ! role network-operator
username admin password 5 $1$KIPRDtFF$7eUMjCAd7Nkhktzebsg5/0 role network-admin
no password strength-check
switch#
This example shows how to view the configuration changes between the current startup configuration
and a saved startup configuration:
switch# checkpoint chkpnt-1