286
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show ip arp inspection statistics
show ip arp inspection statistics
To display the Dynamic ARP Inspection (DAI) statistics, use the show ip arp inspection statistics
command.
show ip arp inspection statistics [vlan vlan-list]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the DAI statistics for VLAN 1:
switch# show ip arp inspection statistics vlan 1
Related Commands
vlan vlan-list (Optional) Specifies the list of VLANs for which to display DAI statistics. Valid
VLAN IDs are from 1 to 4094. You can specify a VLAN or range of VLANs.
Release Modification
5.0(3)N1(1) This command was introduced.
Command Description
clear ip arp inspection
statistics vlan
Clears the DAI statistics for a specified VLAN.
show ip arp inspection log Displays the DAI log configuration.
show running-config dhcp Displays DHCP snooping configuration, including the DAI
configuration.
To Next Page
Loading...
