Cisco Nexus 5500 Series - Show Running-Config Arp

315
Cisco Nexus 5500 Series NX-OS Security Command Reference
OL-27883-02
Chapter Show Commands
show running-config arp
show running-config arp
To display the Address Resolution Protocol (ARP) configuration in the running configuration, use the
show running-config arp command.
show running-config arp [all]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the ARP configuration:
switch# show running-config arp
!Command: show running-config arp
!Time: Mon Aug 23 07:33:15 2010
version 5.2(1)N1(1)
ip arp timeout 2100
ip arp event-history errors size medium
interface Vlan10
ip arp 10.193.131.37 00C0.4F00.0000
switch#
This example shows how to display the ARP configuration with the default information:
switch# show running-config arp all
!Command: show running-config arp all
!Time: Mon Aug 23 07:33:52 2010
version 5.2(1)N1(1)
ip arp timeout 1500
ip arp event-history cli size small
ip arp event-history snmp size small
ip arp event-history client-errors size small
ip arp event-history client-event size small
ip arp event-history lcache-errors size small
ip arp event-history lcache size small
ip arp event-history errors size small
ip arp event-history ha size small
ip arp event-history event size small
ip arp event-history packet size small
all (Optional) Displays configured and default information.
Release Modification
5.2(1)N1(1) This command was introduced.