Cisco Nexus 5500 Series - Page 38

132
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter D Commands
default shutdown (virtual Ethernet interface)
default shutdown (virtual Ethernet interface)
To enable default commands on a virtual Ethernet interface, use the default shutdown command.
default shutdown
Syntax Description This command has no arguments or keywords.
Command Default No description is added.
Command Modes Virtual Ethernet interface configuration
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to enable a virtual Ethernet interface:
switch# configure terminal
switch(config)# interface vethernet 1
switch(config-if)# default shutdown
switch(config-if)#
Related Commands
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
show interface
vethernet
Displays the virtual Ethernet interface configuration information.
show running-config Displays the contents of the currently running configuration file.