1413
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter Show Commands
show udld
Message interval: 15
Timeout interval: 5
CDP Device name: N5Kswitch-2(FLC12280095)
Interface Ethernet1/2
--------------------------------
Port enable administrative configuration setting: device-default
Port enable operational state: enabled
Current bidirectional state: bidirectional
Current operational state: advertisement - Single neighbor detected
Message interval: 15
Timeout interval: 5
Entry 1
----------------
--More--
switch#
This example shows how to display the UDLD information for a specified interface:
switch# show udld ethernet 1/1
Interface Ethernet1/1
--------------------------------
Port enable administrative configuration setting: device-default
Port enable operational state: enabled
Current bidirectional state: bidirectional
Current operational state: advertisement - Single neighbor detected
Message interval: 15
Timeout interval: 5
Entry 1
----------------
Expiration time: 41
Cache Device index: 1
Current neighbor state: bidirectional
Device ID: FLC12280095
Port ID: Ethernet1/1
Neighbor echo 1 devices: SSI130205RT
Neighbor echo 1 port: Ethernet1/1
Message interval: 15
Timeout interval: 5
CDP Device name: N5Kswitch-2(FLC12280095)
switch#
This example shows how to display the UDLD global status and configuration on all interfaces:
switch# show udld global
UDLD global configuration mode: enabled
UDLD global message interval: 15
switch#
This example shows how to display the UDLD neighbor interfaces:
switch# show udld neighbors
Port Device Name Device ID Port ID Neighbor State
--------------------------------------------------------------------------
Ethernet1/1 FLC12280095 1 Ethernet1/1 bidirectional
Ethernet1/2 FLC12280095 1 Ethernet1/2 bidirectional
Ethernet1/3 FLC12280095 1 Ethernet1/3 bidirectional
Ethernet1/4 FLC12280095 1 Ethernet1/4 bidirectional