4-15
Cisco Nexus 5000 Series Hardware Installation Guide
Chapter 4 Replacing Components
Replacing a Fan Module
Step 2 Place the fan module into the front chassis fan slot so it rests on the chassis, and then push the fan module
into the chassis as far as it can go until the captive screw makes contact with the chassis, and tighten the
captive screw. To install a fan module in a Cisco Nexus 5596 chassis, see Figure 4-13. To install a fan
module in a Cisco Nexus 5548 chassis, see Figure 4-14. To install a fan module in a Cisco Nexus 5020
chassis, see Figure 4-15. To install a fan module in a Cisco Nexus 5010 chassis, see Figure 4-16.
Figure 4-13 Installing a Fan Module in a Cisco Nexus 5596 Chassis
Figure 4-14 Installing a Fan Module in a Cisco Nexus 5548 Chassis
To Next Page
Loading...
