Cisco Nexus 5600 Series - no switchport

1-6
Cisco Nexus 5600 Series Hardware Installation Guide
Chapter 1 Overview
Cisco Nexus 5648Q
Figure 1-3 Port Side View of the Cisco Nexus 5648Q Switch
Chassis
The Cisco Nexus 5648Q switch chassis is 2RU, 3.5 inches (8.9 cm) tall, 17.5 inches (44.4 cm) wide and
30 inches (76.2 cm) deep. It is designed to be mounted in a standard 19-inch wide rack. This chassis also
supports N+N power supply redundancy and N+1 fan module redundancy.
Expansion Modules
Expansion modules allow the Cisco Nexus 5600 switches to be configured as cost-effective switches and
as I/O consolidation platforms. The following table lists the expansion modules supported by the Cisco
Nexus 5648Q switch.
1 Expansion modules 4 Expansion module screws
2 Chassis locater (top) and Status (bottom) LEDs 5 Chassis ground
3 24 fixed 40Gbps QSFP+ ports
2
4
3
5
1
353796
Table 1-3 Expansion Modules for Cisco Nexus 5648Q
Part Number Details
N5600-M12Q Nexus 5648Q Expansion Module, 12 x 40G QSFP+ fixed
ports (see Figure 1-4)
N5600-M12Q= Nexus 5648Q Expansion Module, 12 x 40G QSFP+ fixed
ports, spare