Cisco Nexus 5600 Series - Page 146

142
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter C Commands
clear ip igmp interface statistics
clear ip igmp interface statistics
To clear the IGMP statistics for an interface, use the clear ip igmp interface statistics command.
clear ip igmp interface statistics [if-type if-number] [ethernet slot/port | loopback if_number |
port-channel number[.sub_if_number]]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to clear IGMP statistics for an interface:
switch# clear ip igmp interface statistics ethernet 2/1
switch#
ethernet
slot/port
(Optional) Specifies the Ethernet interface and the slot number and port number. The
slot number is from 1 to 255, and the port number is from 1 to 128.
loopback
if_number
(Optional) Specifies the loopback interface. The loopback interface number is from
0 to 1023.
port-channel
number
(Optional) Specifies the EtherChannel interface and EtherChannel number. The
range is from 1 to 4096.
sub_if-number (Optional) Subinterface number. The range is from 1 to 4093.
if-type (Optional) Interface type. For more information, use the question mark (?) online
help function.
if-number (Optional) Interface or subinterface number. For more information about the
numbering syntax for your networking device, use the question mark (?) online help
function.
Release Modification
6.0(2)N1(1) This command was introduced.