Cisco Nexus 5600 Series - Page 154

150
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter I Commands
ip igmp event-history
ip igmp event-history
To configure the size of the IGMP event history buffers, use the ip igmp event-history command. To
revert to the default buffer size, use the no form of this command.
ip igmp event-history {cli | errors | group-debugs | group-events | ha | igmp-internal |
interface-debugs | interface-events | msgs | mtrace | policy | statistics | vrf} size buffer-size
no ip igmp event-history {clis | errors | group-debugs | group-events | ha | igmp-internal |
interface-debugs | interface-events | msgs | mtrace | policy | statistics | vrf} size buffer-size
Syntax Description
Command Default All history buffers are allocated as small.
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
clis Configures the IGMP CLI event history buffer size.
errors Configures the error event history buffer size.
group-debugs Configures the IGMP group debug event history buffer size.
group-events Configures the IGMP group-event event history buffer size.
ha Configures the IGMP HA event history buffer size.
igmp-internal Configures the IGMP IGMP-internal event history buffer size.
interface-
debugs
Configures the IGMP interface debug event history buffer size.
interface-
events
Configures the IGMP interface-event event history buffer size.
msgs Configures the message event history buffer size.
mtrace Configures the IGMP mtrace event history buffer size.
policy Configures the IGMP policy event history buffer size.
statistics Configures the statistics event history buffer size.
vrf Configures the IGMP VRF event history buffer size.
size Specifies the size of the buffer to allocate.
buffer-size Buffer size that is one of the following values: disabled, large, medium, or small.
The default buffer size is small.
Release Modification
6.0(2)N1(1) This command was introduced.