Cisco Nexus 5600 Series - Page 191

187
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter Show Commands
show running-config igmp
show running-config igmp
To display information about the running-system configuration for IGMP, use the show running-config
igmp command.
show running-config igmp [all]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to display information about the IGMP running-system configuration:
switch(config)# show running-config igmp
!Command: show running-config igmp
!Time: Fri May 2 08:05:08 2008
version 5.0(3)N1(1)
interface Ethernet1/5
ip igmp static-oif 230.0.0.0
switch(config)#
all (Optional) Displays configured and default information.
Release Modification
6.0(2)N1(1) This command was introduced.