Cisco Nexus 5600 Series - ip igmp snooping (Global)

200
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter I Commands
ip igmp snooping (Global)
ip igmp snooping (Global)
To enable IGMP snooping for the current virtual device configuration (VDC), use the ip igmp snooping
command. To disable IGMP snooping for the current VDC, use the no form of this command.
ip igmp snooping
no ip igmp snooping
Syntax Description This command has no arguments or keywords.
Command Default Enabled
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines If the global configuration of IGMP snooping is disabled, then all VLANs are treated as disabled,
whether they are enabled or not.
This command does not require a license.
Examples This example shows how to enable IGMP snooping for the current VDC:
switch(config)# ip igmp snooping
switch(config)#
This example shows how to disable IGMP snooping for the current VDC:
switch(config)# no ip igmp snooping
switch(config)#
Related Commands
Release Modification
6.0(2)N1(1) This command was introduced.
Command Description
show ip igmp snooping Displays IGMP snooping information.