Cisco Nexus 5600 Series - Page 22

Show Commands
show forwarding distribution ip igmp snooping
MCR-18
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show forwarding distribution ip igmp snooping
To display information about Layer 2 IGMP snooping multicast Forwarding Information Base (FIB)
distribution, use the show forwarding distribution ip igmp snooping command.
show forwarding distribution ip igmp snooping [vlan vlan-id [group group-addr [source
source-addr]]]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about Layer 2 IGMP snooping multicast FIB
distribution:
switch(config)# show forwarding distribution ip igmp snooping
Related Commands
vlan vlan-id (Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093.
group
group-addr
(Optional) Specifies a group address.
source
source-addr
(Optional) Specifies a source address.
Release Modification
5.0(3)N1(1) This command was introduced.
Command Description
test forwarding
distribution perf
Tests the forwarding distribution performance of the Forwarding
Information Base (FIB).