Cisco Nexus 5600 Series - Page 268

264
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter Show Commands
show ip msdp count
show ip msdp count
To display information about Multicast Source Discovery Protocol (MSDP) counts, use the show ip
msdp count command.
show ip msdp count [asn] [vrf {vrf-name | all}]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to display MSDP counts:
switch(config)# show ip msdp count
asn (Optional) Autonomous system (AS) number.
vrf (Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all Specifies all VRFs.
Release Modification
6.0(2)N1(1) This command was introduced.