Cisco Nexus 5600 Series - Page 302

298
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter C Commands
clear ipv6 pim event-history
clear ipv6 pim event-history
To clear information in the IPv6 Protocol Independent Multicast (PIM6) event history buffers, use the
clear ipv6 pim event-history command.
clear ipv6 pim event-history
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to clear information in the PIM6 event history buffers:
switch(config)# clear ipv6 pim event-history
switch(config)#
Related Commands
Release Modification
4.1(2) This command was introduced.
Command Description
ipv6 pim event-history Configures the size of the PIM6 event history buffers.
show ipv6 pim
event-history
Displays information in the PIM6 event history buffers.