Cisco Nexus 5600 Series - Page 304

300
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter C Commands
clear ipv6 pim policy statistics
clear ipv6 pim policy statistics
To clear Protocol Independent Multicast for IPv6 (PIM6) policy counters, use the clear ipv6 pim policy
statistics command.
clear ipv6 pim policy statistics {jp-policy | neighbor-policy} if-type if-number
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the Enterprise Services license.
Examples This example shows how to clear PIM6 join-prune policy counters:
switch(config)# clear ipv6 pim policy statistics jp-policy
Related Commands
jp-policy Specifies the statistics for join-prune policy.
neighbor-
policy
Specifies the statistics for neighbor policy.
if-type Interface type. For more information, use the question mark (?) online help function.
if-number Interface or subinterface number. For more information about the numbering syntax
for your networking device, use the question mark (?) online help function.
Release Modification
4.0(1) This command was introduced.
Command Description
show ipv6 pim policy
statistics
Displays PIM6 policy statistics.