Cisco Nexus 5600 Series - F Commands

301
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter C Commands
clear ipv6 pim route
clear ipv6 pim route
To clear routes specific to Protocol Independent Multicast for IPv6 (PIM6), use the clear ipv6 pim route
command.
clear ipv6 pim route {* | group-prefix | group [source]} [vrf {vrf-name | all}]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the Enterprise Services license.
Examples This example shows how to clear the all the routes specific to PIM6:
switch(config)# clear ipv6 pim route *
switch(config)#
Related Commands
* Specifies all routes.
group-prefix Group prefix.
group Group address.
source (Optional) Source (S, G) route.
vrf (Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name VRF name.
all Specifies all VRFs.
Release Modification
4.1(2) This command was introduced.
Command Description
show ipv6 pim route Displays information about PIM6 specific routes.