R Commands
restart pim6
MCR-407
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
restart pim6
To restart the IPv6 Protocol Independent Multicast (PIM6) process, use the restart pim6 command.
restart pim6
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the Enterprise Services license.
Examples This example shows how to restart the PIM6 process:
switch(config)# restart pim6
Related Commands
Release Modification
5.0(3)N1(1) This command was introduced.
Command Description
ipv6 pim flush-routes Enables flushing routes when the PIM6 process is restarted.
To Next Page
Loading...
