Cisco Nexus 5600 Series - Page 86

Show Commands
show ip pim policy statistics register-policy
MCR-82
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ip pim policy statistics register-policy
To display information about the register policy statistics for IPv4 Protocol Independent Multicast
(PIM), use the show ip pim policy statistics register-policy command.
show ip pim policy statistics register-policy [vrf {vrf-name | all | default | management}]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to display information about PIM policy statistics:
switch(config)# show ip pim policy statistics register-policy vrf all
vrf (Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all Specifies all VRFs.
default Specifies the default VRF.
management Specifies the management VRF.
Release Modification
5.0(3)N1(1) This command was introduced.