Cisco Nexus 5600 Series - Page 9

5
Cisco Nexus 5500 Series NX-OS Multicast Routing Command Reference
OL-30879-01
Chapter C Commands
clear ip mroute
switch# show ip mroute
IP Multicast Routing Table for VRF "default"
(*, 232.0.0.0/8), uptime: 00:00:01, pim ip
Incoming interface: Null, RPF nbr: 0.0.0.0
Outgoing interface list: (count: 0)
(10.1.1.1/32, 232.1.1.1/32), uptime: 0.427116, igmp ip pim
Incoming interface: Ethernet1/29, RPF nbr: 192.168.2.1
Outgoing interface list: (count: 1)
Ethernet1/3, uptime: 0.427044, igmp
This example shows the status of the multicast
This example shows the status of the multicast routes after the clear ip mroute * command.
switch# clear ip mroute *
switch# show ip mroute
IP Multicast Routing Table for VRF "default"
(*, 232.0.0.0/8), uptime: 00:00:01, pim ip
Incoming interface: Null, RPF nbr: 0.0.0.0
Outgoing interface list: (count: 0)
Related Commands Command Description
show ip mroute Displays information about IPv4 multicast routes.