Show Commands
show ip pim statistics
MCR-89
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
BSs received but not listen configured: 0
Cand-RPs from border interfaces: 0
Cand-RPs received but not listen configured: 0
Auto-RP processing (sent/received):
Auto-RP Announces: 0/0, Auto-RP Discoveries: 0/0
Auto-RP RPF failed: 0, Auto-RP from border interfaces: 0
Auto-RP invalid type: 0, Auto-RP TTL expired: 0
Auto-RP received but not listen configured: 0
General errors:
Control-plane RPF failure due to no route found: 0
Data-plane RPF failure due to no route found: 0
Data-plane no multicast state found: 0
Data-plane create route state count: 0
vPC packet stats:
assert requests sent: 0
assert requests received: 0
assert request send error: 0
assert response sent: 0
assert response received: 0
assert response send error: 0
assert stop sent: 0
assert stop received: 0
assert stop send error: 0
rpf-source metric requests sent: 0
rpf-source metric requests received: 0
rpf-source metric request send error: 0
rpf-source metric response sent: 0
rpf-source metric response received: 0
rpf-source metric response send error: 0
rpf-source metric rpf change trigger sent: 0
rpf-source metric rpf change trigger received: 0
rpf-source metric rpf change trigger send error: 0
switch(config)#
To Next Page
Loading...
