Cisco Nexus 7000 Series - Page 330

This example shows how to change the maximum number of simultaneous EAPoUDP posture-validation
sessions for an interface:
switch# config t
switch(config)# interface ethernet 1/1
switch(config-if)# eou ratelimit 30
This example shows how to revert to the default maximum number of simultaneous EAPoUDP
posture-validation sessions for an interface:
switch# config t
switch(config)# interface ethernet 1/1
switch(config-if)# no eou ratelimit
Related Commands
DescriptionCommand
Enables EAPoUDP.feature eou
Displays EAPoUDP information.show eou
Cisco Nexus 7000 Series Security Command Reference
304
E Commands
eou ratelimit