Cisco Nexus 7000 Series - Page 793

Usage Guidelines
You must enable the 802.1X feature by using the feature eou command before using this command.
This command does not require a license.
Examples
This example shows how to display all 802.1X feature status and configuration information:
switch# show eou all
This example shows how to display 802.1X clientless authentication information:
switch# show eou authentication clientless
This example shows how to display 802.1X EAP authentication information:
switch# show eou authentication eap
This example shows how to display 802.1X static authentication information:
switch# show eou interface ethernet 2/1
This example shows how to display 802.1X information for an Ethernet interface:
switch# show eou ip-address 10.10.10.1
This example shows how to display 802.1X information for a MAC address:
switch# show eou mac-address 0019.076c.dac4
This example shows how to display 802.1X information for a MAC address:
switch# show eou posturetoken healthy
Related Commands
DescriptionCommand
Enables the 802.1X feature.feature eou
Cisco Nexus 7000 Series Security Command Reference
767
Show Commands
show eou