Send document comments to nexus7k-docfeedback@cisco.com
4-11
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Chapter 4 Installing a Cisco Nexus 7018 Chassis
Installing the Chassis
Figure 4-4 Attaching the Cisco Nexus 7018 Chassis to the Rack
1 Handles used to adjust the chassis placement 2 Nine M6 x 19 mm or 10-24 x 3/4 in. Phillips
screws used to attach each side bracket to a
front mounting rail (use a total of 18 screws)
To Next Page
Loading...
