Cisco Nexus 7706 - Transceivers, Connectors, and Cables Used with Each I;O Module

Transceivers, Connectors, and Cables Used with Each I/O
Module
Table 5: F3 Series 48-port, 1- and 10-Gigabit Ethernet (N77-F348XP-23) Transceivers and Cables
Cable TypeTransceiver or ConnectorPort Type
10-Gigabit Fabric Extender Transceiver
(FET) for FEX connections
2
FET-10GFET
Multi-mode fiber (MMF)SFP-10G-SRSFP+
Single-mode fiber (SMF)
DWDM-SFP10G-xx.xx
SFP-10G-ER
SFP-10G-LR
SFP-10G-LRM
SFP-10G-ZR
Twinax cable assembly, passiveSFP-H10GB-CU1M
SFP-H10GB-CU1-5M
SFP-H10GB-CU2M
SFP-H10GB-CU2-5M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
Twinax cable assembly, activeSFP-H10GB-ACU7M
SFP-H10GB-ACU10M
Active optical cable assemblySFP-10G-AOC1M
SFP-10G-AOC3M
SFP-10G-AOC5M
SFP-10G-AOC7M
SFP-10G-AOC10M
2
FETs are used only when connecting this I/O module to a Fabric Extender (FEX).
Table 6: F3 Series 24-port, 40-Gigabit Ethernet (N77-F324FQ-25) Transceivers and Cables
Cable TypeTransceiver or ConnectorPort Type
40-Gigabit Fabric Extender
Transceiver (FET) for FEX
connections
3
FET-40GFET
Cisco Nexus 7706 Hardware Installation Guide
OL-31330-01120
Switch Specifications
Transceivers, Connectors, and Cables Used with Each I/O Module