Cisco Nexus 7706 - 100-Gb QSFP+ Transceiver Specifications

For the cable specifications that apply to these transceivers, see the following table.
Maximum Cable
Distance
Modal Bandwidth
(MHz-km)
Core Size
(microns)
Wavelength
(nm)
Connector
Type
Cable
Type
Transceiver
6.21 miles (10 km)—G.6521310LC DuplexSMFCPAK-100G-LR4
328 feet (100 m)
492 feet (150 m)
2000 (OM3)
4700 (OM4)
50.0
50.0
85024-fiber
MPO/MTP
MMFCPAK-100G-SR10
For the environmental specifications, see the following table.
SpecificationParameter
–40 to 158°F (–40 to 70°C)Storage temperature
32 to 104°F (0 to 40°C)Operating temperature
5 to 95 percent, noncondensingStorage relative humidity
5 to 90 percent, noncondensingOperating relative humidity
100-Gb QSFP+ Transceiver Specifications
The 100-Gigabit QSFP+ transceivers are used with the M3-Series 100-Gigabit I/O module (N77-M312CQ-26L)
. This I/O module supports Forward Error Correction (FEC) with the 100-Gigabit QSFP+ transceivers. For
more information, refer FEC Support on Optic Modules.
Note
For the cable specifications that apply to these transceivers, see the following table.
Maximum Cable
Distance
Modal
Bandwidth
(MHz-km)
Core Size
(microns)
Wavelength
(nm)
Connector TypeCable TypeTransceiver
230 feet (70 m) over
OM3 Multimode Fiber
328 feet (100 m) over
OM4 Multimode Fiber
2000 (OM3)
4700 (OM4)
50.0
50.0
85012-fiber MPOMMFQSFP-100G-SR4-S
6.21 miles (10 km)—G.6521295, 1300,
1304, 1309
LC DuplexSMFQSFP-100G-LR4-S
1.24 miles (2 km)—G.6521271, 1291,
1311, 1331
LC DuplexSMFQSFP-100G-CWDM4-S
1640 feet (500 m)—G.652131012-fiber MPOSMFQSFP-100G-PSM4-S
Cisco Nexus 7706 Hardware Installation Guide
OL-31330-01126
Switch Specifications
100-Gb QSFP+ Transceiver Specifications