Region NameFeature Name
qos, qos-lite, rp-qos, rp-qos-lite, ns-qos,
e-qos, or e-qos-lite: For classifying IPv4
packets
ing-l2-qos: For classifying ingress Layer
2 packets (Cisco Nexus 9200 Series
switches only)
ipv6-qos, rp-ipv6-qos, ns-ipv6-qos, or
e-ipv6-qos: For classifying IPv6 packets
mac-qos, rp-mac-qos, ns-mac-qos, or
e-mac-qos: For classifying non-IP packets
For traffic that needs to be
classified on 40G ports on
Cisco Nexus 9300 Series
switches, you must carve the
qos regions and the
corresponding ns-*qos regions.
Note
Port QoS (QoS classification policy applied on Layer 2 ports or
port channels)
vacl: For IPv4 packets
ipv6-vacl: For IPv6 packets
mac-vacl: For non-IP packets
VACL
vqos or ns-vqos: For classifying IPv4
packets
ipv6-vqos or ns-ipv6-vqos: For classifying
IPv6 packets
ing-l3-vlan-qos: For classifying ingress
Layer 3, VLAN, and SVI QoS packets
(Cisco Nexus 9200 Series switches only)
mac-vqos or ns-mac-vqos: For classifying
non-IP packets
For traffic that needs to be
classified on 40G ports on
Cisco Nexus 9300 Series
switches, you must carve the
qos regions and the
corresponding ns-*qos regions.
Note
VLAN QoS (QoS classification policy applied on a VLAN)
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
225
Configuring IP ACLs
ACL TCAM Regions
To Next Page
Loading...
